Please note that many of our sheds are fully adaptable where you can position the doors and windows on any side as you build it.

If you require a shed with additional or fewer doors or windows etc then this is usually not an issue for us.

If there is anything more complex you would like then please get in touch with your requirements and we can advise through either calling us on 01274 036577 or emailing us at hello@powersheds.com.

Our range of Power sheds are modular allowing you to build them in your own way. You can choose where you want the door and windows (if applicable) as you assemble it, allowing the shed to fit your garden. The side wall panels are in 4ft and 2ft modular sections and so you can choose the position of these panels as you build it. The components at the top of the gable are separate components which allows you the flexibility to do this. The shed comes complete with comprehensive instructions and fixings.

Example variations of the 20×6 Power Apex Shed:

The following video shows an apex shed but this modular adaptable system applies to any of our sheds, whether it is a pent or apex.

Of course! We have many shed trade agents up and down the UK, who can be found on our store finder page

We advise you call ahead if there is a trader in a reachable distance from you. Some trade agents will not have every building we offer on display but you will be able to see and feel the quality of the shed and order in store.

Our location is a manufacturing site only, and unfortunately we do not have a show site ourselves.

Yes – we can certainly provide a shed with another door. This could be a door at each end of the shed to create a kind of tunnel, or two doors next to each other for example. There are plenty options available for garden sheds with two doors.

Pricing available on enquiry.

Please note, there are different charges for the security sheds as these come with a high security lock.

If you would like to place an order for a garden shed with two doors then you would have to order this over the telephone.

All Power sheds come with a fully boarded tongue and groove floor with pre attached floor joists which sit on the underside of the floor lifting the shed off the base by 44mm. 

The tongue and groove boards are 12mm thick.

Absolutely – full and comprehensive instructions are included. We also supply all the screws and nails necessary to put together your garden building. If you have any issues installing please do not hesitate to get in touch so we can help you over the phone.

If you would like to take a look at our installation videos – please click here.

Please see our installation instructions for all of our building range.

Yes – all wooden sheds need to go on a firm and level base. This could be a concrete base, paving slab base, timber bearers, or any other suitable base solution which is firm and level. 

You can purchase a Power Base which fits the Power shed range perfectly making base preparation as easy as possible. 

To build your own base please visit our build a shed base guide.

Your shed is delivered on a pallet and unloaded off the delivery vehicle via a tail lift and pallet truck. Therefore the delivery driver will be unable to take it much further than the pavement / driveway, depending on access. Where the delivery is made is down to the delivery driver’s discretion. 

All deliveries must be signed for unless agreed. If we are unable to deliver but arrived on the day you selected and there is nobody in, or the delivery vehicle is unable to access. Then we would have to take the package away and there may be re-delivery charges. For this reason please listen out for the door bell.

The approximate delivery vehicle sizes are as follows –

Our Courier

The courier we use are Expect Distribution who are a shareholding founding member of Palletline – a leading national network for palletised consignments. Just to give an overview of the size of their operation:

• 3.5 million pallets per year
• Damage rate of just 0.01%
• 96 depots
• 12,334 staff
• 6,017 vehicles

Typical deliveries are made on either a 26 or 18 ton lorry, however a 12 or 7.5 ton vehicle can be requested if necessary (This may be either size and is depot dependant). The driver makes use of a tail lift and a pallet truck to safely and efficiently transfer the pallet from vehicle to the delivery point. The driver shouldn’t need any assistance during this process.

The Pallet

We use standard UK sized pallets measuring 1200mm x 1000mm while also being 2200mm tall. Each panel is secured in place to the pallet and can be easily removed one by one for maximum convenience.

On the outside of each pallet will be instructions for the shed you’ve purchased while the fixings will be inside one of the panels. Also note if you have purchased a base kit or any extras these will be also be inside the panels to maximise the space used to transport your goods and also to protect them during transit.

Note: Depending on the size of your order, more than one pallet may have to be used (at no extra cost to you).

Yes, it is possible to replace components after installation of your garden building has taken place. Please see our range of tutorial videos below for guidance on how to go about this. Before commencing any repairs, please contact our helpful Customer Care team by email at hello@powersheds.com who will be happy to offer advice on what materials may be needed for your repairs.

Shiplap Board Replacement (Full Board)

Shiplap Board Replacement (Next to Door)

Shiplap Board Replacement (Next to Window)

Overlap Board Replacement (Full Board)

Overlap Board Replacement (Next to Door)

Overlap Board Replacement (Next to Window)

Panel Replacement

Glass Pane Replacement

Yes, there is a 10 year guarantee on the timber against timber rot, decay and insect infestation. For more details please see our 10 year guarantee page.